martes, 15 de noviembre de 2011

How to install POS58 USB THERMAL PRINTER: Correct settings

*First we need to download the driver
For convinience i've uploaded it to mediafire

*Do the steps before connecting printer
<<<VERY IMPORTANT>>>>


here is the download link
http://www.mediafire.com/?dt7nrw8nf9mjhaq
On the download screen click on "Download (446.65kb";
its just the setup driver for POS58 USB THERMAL PRINTER

Or click on the image for download:



Click save or run:
If u click run you will see this screen:

Click on " More options" then go to " Run anyway"


If u click save follow the instruccions


Execute aplication, and perhaps some dialog box appears, it will ask you for permissions, allow it
driver only for "POS58 USB THERMAL PRINTER "


After finish install, choose the correct OS ( most of the time installer detects them automatically)
and click "Next"


leave everything as is, click ok
( LPT1: & "Set as default printer" for POS enviroment )



Click finish, and make sure " View printer porperty...." its checked
FROM NOW CONNECT PRINTER TO USB PORT


Once there goto advanced



Change original " LPT1: Printer port"


Change it for " USB001 Virtual port for..." and click apply


You can print a test page; now your printer POS58 should work
Finish click apply.



*I made this guide for windows 7, but u can use it for every supported version.

*I am not a technical support don't email me


Update 4/27/2013
For those with W8/64:
Disable driver signature verification & Try This
Try this

Welcome to Microsoft answers.
As a work around you need to follow these below provided steps in order to troubleshoot this issue.
 Now you need to uninstall the printer on your computer, to do that please follow the steps provided below.
 1.       Open Devices and Printers by clicking the Start, and then, on the Start menu, clicking Devices and Printers.
2.       Right-click the printer that you want to remove, click Remove device, and then click Yes.
If you can't delete the printer, right-click it again, click Run as administrator, click Remove device, and then click Yes.  If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
Now you need to install the printer again on your computer and check for the issue to do that please follow the steps provided below.
 1.       Open Devices and Printers by clicking the Start, and then, on the Start menu, clicking Devices and Printers.
2.       Click Add a printer.
3.       In the Add Printer wizard, click Add a local printer.
4.       On the Choose a printer port page, make sure that the Use an existing port button and the recommended printer port are selected, and then click Next.
5.       On the Install the printer driver page, select the printer manufacturer and model, and then click Next.
·         If your printer isn't listed, click Windows Update, and then wait while Windows checks for additional drivers.
·         If none are available and you have the installation CD, click Have Disk, and then browse to the folder where the printer   driver is located. (For additional help, consult the printer manual.)
6.       Complete the additional steps in the wizard, and then click Finish.
If you find any difficulty in following the steps provided below you can follow the link provided below for further reference.
 http://windows.microsoft.com/en-us/windows7/Install-a-printer
 If none of the above provided steps resolve the issue then you need to install the latest drivers for the printer and check for the issue.
 To get the latest drivers for the printer.
 Click on the link below for more information on updating the drivers and check for the issue.
http://windowshelp.microsoft.com/Windows/en-US/Help/b3c6477e-1111-4b9f-a52a-fffdc51e9c901033.mspx
Swathi B  - Microsoft Support.
Visit our Microsoft Answers Feedback Forum and let us know what you think.
Source:
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/cant-delete-improperly-installed-printer-epsom-c88/35d8ed9b-88f2-4924-89cf-4b56793f9996

35 comentarios:

  1. Thank you for your help, it worked fine for me.

    With W7 x64.

    ResponderEliminar
    Respuestas
    1. I f f a i lu r e oc c ur s w h i le i ns t a l l ing ou r pr in t er dr i v e r o n W in dow s 8, p le as e f o l l ow t he s t ep s
      as be l ow :
      1. Place the mouse in the lower right corner , Choose “SETTINGS”....Select "Change PC Settings".... Then “GENERAL”...... Go to the bottom and select “ ADVANCED STARTUP”.... Click “RESTART NOW”....Then select “TROUBLESHOOT”-------> “ADVANCED OPTIONS” --------> “STARTUP SETTINGS” and select “RESTART”. 2. When the computer reboots, Press the key7for "Disable driver signature enforcement".
      3. Install our printer driver again. If there is any warning message coming out , please select “continue anyway” (like on windows xp,windows vista,windows 7).

      Eliminar
  2. Lo necesito para Windows 8, no corre por ningún motivo. como puedo hacer?

    ResponderEliminar
  3. Dice Microsoft que todo lo que le queda a W7 le queda a W8

    ResponderEliminar
  4. Hello, I tried on a W8-64 and doesn't work. any tip?

    ResponderEliminar
    Respuestas
    1. Pues el controlador se hizo en tiempo antes de la aparicion de sistemas de 64 bits, mandame un correo a hpegar@yahoo.com.mx no estaria mal intentarlo.

      Eliminar
    2. Well driver where made in time befire 64 bits system appear, but we may try add me ::
      hpegar@yahoo.com.mx

      Eliminar
  5. Hola... pudiste finalmente instalar el POS58 en W8 X64?

    ResponderEliminar
  6. Thank you very much for sharing driver... Regards from Turkey :)

    ResponderEliminar
  7. Hi, I need help please. I need driver for POS58 W8 x64. megahitbazos@gmail.com

    ResponderEliminar
    Respuestas
    1. I need the driver too for windows8. Its been 1 month I cant figure it out. Please help

      Eliminar
  8. Hi..me too, I need Windows 8 x64 for my POS58 printer. Could you please help?

    ResponderEliminar
  9. For those with W8/64:
    Disable driver signature verification & Try This
    Try this

    http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/cant-delete-improperly-installed-printer-epsom-c88/35d8ed9b-88f2-4924-89cf-4b56793f9996

    ResponderEliminar
  10. thank u a lot .. you just now saved me from throwing away my printer

    ResponderEliminar
  11. Respuestas
    1. Read First:

      For those with W8/64:
      Disable driver signature verification & Try This
      Try this

      http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/cant-delete-improperly-installed-printer-epsom-c88/35d8ed9b-88f2-4924-89cf-4b56793f9996

      Eliminar
    2. No consigo instalar POS 80A y POS 58 para W7 me ayudas....
      El link de mediafire no funciona...
      gracias

      Eliminar
  12. Ahora si,
    No consigo instalar POS 80A y POS 58 para W7 me ayudas....
    El link de mediafire no funciona...
    gracias

    ResponderEliminar
    Respuestas
    1. El link de mediafire funciona correctamente, contiene los archivos necesarios para ser instalado en Windows xp/vista/7/8.

      Cual es el problema?

      Eliminar
  13. Gracias por tu ayuda, vos hacéis en VisualBasic?(drive)

    ResponderEliminar
    Respuestas
    1. Macro Scheduler :) Que es una mezcla entre VBscript y Delphi.
      Me gusta mucho mas!!!

      Eliminar
  14. Hugo, te hago una pegunta. Tengo conectada esta impresota con un sistema de comandas, pero necesito que me imprima con letra mas pequeña. Se puede configurar la impresora para eso y no por software? Gracias

    ResponderEliminar
  15. Excelente la solucion para W8/x64 MUCHAS GRACIAS!!!

    ResponderEliminar
  16. Respuestas
    1. Driver and Setp for win8
      http://www.mediafire.com/download/pvwe4xiby6tqcnt/POS58_For_Win8.rar

      Eliminar
    2. I am trying to install it on a windows xp and it is asking me for some files. the one I can't get yet is this one zipos58.ini and it doesn't let me pass this point.

      Please help.

      Eliminar
    3. Have you download the setup ?
      Coz setup will not ask you for any file
      Try to follow steps.

      Eliminar
  17. Hi, I tried to install a printer pos58 on a usb cable 10 m long. Lists the first bon, but at the second bon printer crashes. If I restart the printer, printed voucher unlisted initially
    I think lose signal.
    I tried on a print server TPLINK, but does not see printer (the printer sees another ex. samsung).
    What can I do?
    Thanks.

    ResponderEliminar
  18. Can I connect a printer to the android tablet to print checks with the POS program.The program is called Tabshop. But I can not set up printing. Creator TabShop requests to work with the printer vendor. He writes, "I have to admit that i have no overview about compatible printers as printing on Android is still a tricky issue. TabShop mainly is based upon direct ASCII printin on port 9100. Please ask your printer supplier if direct printing on port 9100 is possible with that model. "Can you help me on this issue? http://www.smartlab.at/tabshop-pos/

    ResponderEliminar